| VLT® AQUA Drive FC 200 |
| Danfoss VLT® AQUA Drive is dedicated to water and wastewater applications. With a wide range of powerful standard and optional features, the VLT® AQUA Drive provides the lowest overall cost of
ownership for water and wastewater applications. |
| Features and benefits |
| Product range |
200-240 V ..... 0.25 kW - 45 kW
380-480 V ..... 0.37 kW - 1000kW
525-600 V ..... 0.75 kW - 90 kW
525-690 V ..... 45 kW - 1,2 MW |
| Enclosures |
| IP20/chassis, IP21/NEMA 1,IP55/NEMA 12 and IP66/NEMA 4X. |
| Dedicated water features Auto tuning of the PI controllers |
| With auto tuning of the PI controllers, the drive monitors how the system reacts on corrections made by the drive - and learns from it, so that precise and stable operation is achie ved quickly. |
| Pipe Fill Mode |
| Enables controlled (closed loop) filling of pipes. Prevents water hammering, bursting water pipes or blowing off sprinkler heads. |
| End of Pump Curve detects breaks and leakage |
| The feature detects breaks and leakage. End of curve triggers an alarm, shuts off the pump, or performs another userdefined action. |
| Dry Pump Protection lowers maintenance costs |
| The VLT® AQUA Drive constantly evaluates the condition of the pump, based on internal frequency/power measurements. |
| Standard cascade controller |
| The in-built cascade controller controls up to three pumps with fixed lead pump. |
| Motor Alternation |
| This built-in logic controls alternation between two pumps in duty/stand-by applications. Motion of the stand-by pump prevents sticking of the pump. An internal timer assures equal usage of the pumps. |
| Flow compensation |
| The flow compensation feature reduces the pressure set point according to the flow - which saves energy. |
| Initial/Final Ramp |
| The initial ramp provides fast acceleration of pumps to minimum speed, from where the normal ramp takes over. This prevents damage on thrust and bearings. Sensorless Pressure or Flow Control. |
| Safety |
| The VLT® AQUA Drive can optionally be delivered with the safe stop functionality suitable for category 3 installations according to EN 954-1. This feature prevents the drive from starting unintended. |
| Accessories |
| A wide selection of accessories is available for the VLT® AQUA Drive to suit your needs. For further details see the Operation Instructions. |
| Options |
| Options for bus communication, user programs, etc., are delivered ready for plug and play. |
| Display options |
Local Control Panel LCP (graphical and numerical)
Cable for LCP, 9.8 ft. [3 m]
Remote-mounting kit for Local Control Panel (LCP) |
| Application options |
| External 24 V supply card |
| Serial Communication Options |
Profibus Option Card (MCA-101)
DeviceNet Option Card (MCA-104)
Ethernet IP (MCA-121) |
| I/O options |
General Purpose I/O (MCB 101)
Relay Option (MCB 105)
Extended cascade option (MCO-101)
Advanced cascade option (MCO-102)
Analogue input option (MCB109)
External 24VDC supply option (MCB-107) |
| Filters |
Harmonic Filter (AHF 005/010 MCE)
Sine-Wave Filters (MCC 101)
dU/dt filter (MCC 102) |
| Other accessories |
IP21/NEMA1 Kit
USB connection cable to PC
Harmonic Filter cable to PC |
| |
